PAGE 7
LS4808 / LS4816 | 8 / 16 CHANNEL SPEAKER LINE SURVEILLANCE
1. Setup Menu
1. SETUP
ENTER
>
BUZZER
ENABLE / DISABLED
3. BUZZER
NEXT
>
BUZZER
DISABLED
PREV
>
BUZZER
ENABLE
Buzzer is available for button pressing and alert / fault signal. This feature can be turned off to fit to ones' preference.
For fault alert buzzer, if this is switch on, the Buzzer LED shall not lit when a failure is detected. If the buzzer is
switched off, the buzzer LED and the correspondence channel fault LED shall lit.
ENTER to confirm ENABLE / DISABLE buzzer.
>
1. SETUP
1. BASIC SETUP
PREV
>
1. SETUP
5. EXIT
1. SETUP
ENTER
>
CHANNEL 01
BP FAULT: YES / NO
4. CH BP ON FAULT
NEXT
>
PREV
>
ENTER to confirm YES / NO.
>
1. SETUP
1. BASIC SETUP
CHANNEL 01
BP FAULT: NO
CHANNEL 01
BP FAULT: YES
BUZZER
CH BP ON FAULT
NEXT
>
1. SETUP
5. EXIT
NEXT
>
1. SETUP
4. CH BP ON FAULT
Press Next / Prev button to switch the Channel
Note: The unit shall measure the impedance of each channel, creating the high and low limits automatically. Whenever the
measured impedance falls outside the limits, the channel shall be considered faulty. The limits are typically 15%, eg if the
circuit has impedance of 1K
Ω, the limits generated shall be 850 to 1.15K Ω.
>
>
