iPX5200 IP NETWORK AUDIO / BGM SERVER
Page 9
Operating iPX5200
On Powering Up, the iPX5200 will automatically switch to audio source that defined in SYSTEM CONFIGURATION page. To
change the audio source:
We can press the SOURCE button to switch between SD Card and Line Inputs. If SD Card is our choice, press PRE / NEXT
button to play desired audio file.
If Line Inputs is our choice, press PRE / NEXT button to select INPUT 1,2,3 or 4.
To stream music to client:
1. Activate the client groups by pressing the desired group buttons.
2. Press the STREAMING button to start streaming audio to the clients.
At the destination end, mixer / audio processing equipment / zone selector must be activated to broadcast the audio.
System firmware shall be updated once in a while when new features or bug fixes are available. There are 2 methods of doing;
Firmware Update
1. Open a browser and type in the iPX5200 IP Address.
2. Under “System Configuration” page look for “Firmware Update” section as shown in below.
Update firmware in Normal Operation Mode:
Click “ Choose File” and choose a binary file with “.acfr” extension. Click
“Update”.
Firmware Updates
File
Once the update is completed, the browser should enter the login page.
iPX5200.acfr
