Page 8
iPX5200 IP NETWORK AUDIO / BGM SERVER
amperes
UP
PRE
DOWN
SOURCE
NEXT
STREMING
1
2
3
4
5
6
7
8
MUSIC CLIENT GROUP
START / STOP
AUDIO SIG
1
2
3
4
The buttons for streaming target ( 8 nos ) is similar to zone selector. An administrator shall have the control over which client to
receive the music streaming. Each button can be assigned a single client ( iPX5300 ) or a group of clients.
Setup : Front Button Setting
To set the matching Client Button ( Destination ) with related iPX5300 Music Client, it is required to access the webpage of the
Client. Follow the steps below :
1. Open a browser and enter the iPX5300 IP address.
2. Under SYSTEM CONFIGURATION > Application Settings, look for “ Music Server IP ” field. Enter the iPX5200 IP address
here.
3. Under “ Group ”, assign group number to this iPX5300. Example, if Group 1 & 2 are checked, that mean this iPX5300 will
receive streaming audio from iPX5200 whenever iPX5200 activate its Group 1 or 2.
4. We can assign a Device Name to this iPX5300 for easy identification, example “ Building A Client ”.
5. The volume / bass / treble level of iPX5300 can also be adjusted here. If we check the box “ Sync with Server ”, then each
time iPX5300 is powered up, it will follow the volume / bass / treble level that are configured on iPX5200.
6. Save any changes made.
Application Settings
Connection Mode
Music Server IP
Sync with Server
Volume
Web Page Theme
Device Name
Group
Bass
Treble
Group 1
Group 5
Group 2
Group 6
Group 3
Group 7
Group 4
Group 8
