background image

AMN-H-D 

13 

 

 

9. 

WARRANTY STATEMENT 

Advanced Microwave Products (AMP) warrants these products to be free from defects in material and workmanship 
for a period of one year from date of original shipment.  AMP shall, at its option, either repair or replace products 
which prove to be defective. 
 
No products may be returned to AMP without the permission of AMP.  BUYER, after obtaining a return authorization 
from AMP, shall return the equipment to AMP accompanied by a report stating as completely as possible the reason 
for return, the defects, and the conditions under which they occurred.  BUYER shall pay all shipping charges, duties, 
and fees for the return of products to AMP.  All warranty services will be carried out at AMP’s facility.  AMP will pay 
for the return of products to the BUYER. 
 
All articles are to be properly and carefully inspected by BUYER upon receipt.  Shipping container damage may 
indicate equipment damage.  All shipping damage must be promptly reported to the carrier.  AMP is not liable for 
shipping damage. 
 
Limitation of Warranty:  The above warranty does not apply to defects of, or resulting from the following: 
 
1) 

End items included as part of a system, but not designed by, AMP are subject only to warranty as may be 
obtained from the original manufacturers.  Such items include, but are not limited to, batteries, cameras, 
monitors, cabling, etc., 

2) 

Operation outside of the environmental specifications of the product, 

3) 

Unauthorized modifications, misuse, or mishandling, 

4) 

Improper or inadequate maintenance by BUYER, 

5) 

Improper or inadequate heat sinking by BUYER, 

6) 

Improper installation or improper testing, 

7) 

Malfunction of connected hardware. 

 
THIS WARRANTY IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS 
EXPRESSED OR IMPLIED.  AMP SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OR 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 
 
The remedies set forth above are the purchaser’s sole and exclusive remedies.  In no circumstances shall AMP 
assume liability for loss, damage, or consequential expense (including loss of profits) whether based on contract, tort, 
or any other legal theory, arising directly or indirectly from the use of its equipment separately or in combination with 
other equipment. 

 
 

Содержание HHA1
















Отзывы: