background image

AMP

®

 Sol Box Brass 

ASDL-2014-B-BZ

INSTALLATION & MAINTENANCE GUIDE

w w w. a m p l i g h t i n g . c o m

–2–

Important Safety Instructions: Read Before Installation

!

Important Safety Instructions

!

This luminaire is intended for installation in accordance with local codes and 

the National Electric Code (NEC). Failure to adhere to these codes and in-

structions may result in serious injury, property damage and void the warran-

ty.

These instructions do not intend to cover all variations in installation, opera-

tion maintenance or mounting situations.

Please note that these solar fixtures are equipped with built-in photocells, so 

they will not turn on until it is dark enough. These fixtures will also require 

plenty of sunlight to function properly. It’s best to have the fixture in an area 

where the sun will get to it at all times throughout the day and where no am-

bient lighting will affect the photocell at night. If your fixture is not function-

ing at night, be sure that the on/off button has been engaged. See step one 

for details.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1.  Lamp gets HOT quickly! 
2.  Do not touch the hot lens, guard or enclosure.
3.  Keep lamp away from materials that may burn.
4.  Do not touch lamp at any time. Use a soft cloth. Oil from skin may dam-

age lamp.

5.  Do not operate the luminaire fitting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

Содержание Sol Box Brass ASDL-2014-B-BZ













Отзывы: