INSTALLATION & MAINTENANCE GUIDE
–6–
w w w. a m p l i g h t i n g . c o m
–6–
AMP
®
Sol Box Brass
ASDL-2014-B-BZ
INSTALLATION OPTIONAL 2
Solar Panel Box
PLENTY OF SUNLIGHT
LACK OF SUNLIGHT
Fixture Body
Max. 8.5”
If the luminaire is going to be installed in a location where there is low
sunlight, make sure it is still close to an area where there is plenty of
sunlight for the solar panel to be installed separately.
Note: This distance must be less then 8.5 inches.
1
Install Mounting Bracket
1. Drill a .90” round hole through
the desired mounting location.
2. Place the mounting bracket above
the hole and mark two points on
the wall using the two mounting
bracket holes as guides.
3. Remove the mounting bracket and
drill proper holes on the marks
for the wall anchors using an
electrical drill.
4. Push the wall anchors into the
drilled holes.
5. Attach the mounting bracket
onto the wall anchors and secure
with screws. Tighten using a
screwdriver.
W
ALL SURF
ACE
Mounting
Bracket
Screw
Wall Anchor
.90” Hole
Hole
