INSTALLATION & MAINTENANCE GUIDE
–4–
w w w. a m p l i g h t i n g . c o m
–4–
3
2
AMP
®
StoutPro Par36 Flood Light
AFL-4011-4-B-BZ
Install Lamp
Install Lens
Use a PAR36 lamp (sold separately),
with correct wattage and type as
marked on luminaire label.
Connect supply wires to screws on the
bottom of lamp, tighten until snug
with screwdriver. Push lamp into lamp
holder and seat in place.
CAUTION: Do not exceed maximum
wattage marked on luminaire label.
NOTE: DO NOT touch lamp with bare
hands. Use soft cloth to handle lamp.
Fixture Body
Lamp
Supply Wire
Install the lens to the fixture body
by aligning the locking parts on
both of them. Be sure to position
the lens so when it turns it locks
properly into place.
Fixture Body
Lens
