background image

Package contents

Assembly

LIGHTLINE  PC972

Table Light

The manufacturer assumes no liability for damage resulting from failure to adhere to the 

steps described in this manual. When unpacking the light, do so with regard for its ma-

terial composition – the main components are made of glass and very fragile materials.

Light (bottom glass section including power cord with switch, diffuse 

triplex bulb cover, upper glass section, rubber seal), light source – bulb 

GU10, 5W – Ehmann dimmer, cotton gloves, installation manual

Use the provided cotton gloves when removing the light from its package.

In order to avoid damaging the glass, ensure that the rubber seal is positioned on the glass shade

(Fig. *1A). Grasp the upper glass section of the light and insert it into the bottom section of the light 

(Fig. *1B)

1.

Plug the power cord into an electrical outlet and ensure that the light is working properly.

Cleaning the glass

The light can be cleaned using common cleaning agents. Do not use solvents or abrasives 

(e.g., scouring powder).  

Prior to shipping, the functionality of each light and its components is thoroughly tested. The 

manufacturer assumes no liability for the mishandling of products. 

Assembly time: 10 minutes (1 person)

322

340

Name:  

Components 

included with unit: 

TECHNICAL SUPPORT

[email protected]

www.brokis.cz

OFFICE

Španielova 1315/25, Praha Řepy, 16300, Czech Republic

ID 64940799, VAT CZ64940799

SHOWROOM AND FACTORY

Sídliště Janštejn 39, Horní Dubenky, 588 52, 
Czech Republic

Отзывы: