manualshive.com logo in svg

Ammann ASC 70, Руководство по эксплуатации

Поделиться
Скачать
Ammann ASC 70 Скачать руководство пользователя страница 95

91

ASC 70

396112

 

OPERATION MANUAL

2.9.4.  Operating the Machine at high 

temperatures and humidity

The higher the air temperature and humidity the lower the en-

gine performance is. Both factors reducing the performance are 

dependent on each other:

 - Each 10 °C (18 °F) increase of temperature means capaci-

ty drop of up to 4 % (at constant humidity)

 - Each 10 % increase of relative humidity means capacity 

drop of up to 2 % (at constant temperature).

Machine cooling will improve through hot air removal away 

from engine compartment when you remove the fender shields 

of the bonnet.

Note
For oil of HV 46 class the max admissible oil temperature will be 

80 °C (176 °F), for HV 32 oil the max admissible oil temperature 

will be 70 °C (158 °F). 
In the environment where hydraulic oil temperature stays con-

stantly round 90 °C (194 °F) we recommend to exchange hydrau-

lic oil for oil denser by one class, with HV 100 cinematic viscosity.

Содержание ASC 70

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды