Ammann ASC 70, Руководство по эксплуатации

Страница: 84 / 184

80 ASC 70
396345
396346
2.7. Machine control and use
• Mount the hose from the filling equipment (a tank located
above, pump, etc.) on the filler neck and fill the tyres with
the solution.
• During the filling, air escapes from the tyre through the side
opening from the filler neck. The tyre is sufficiently filled (at
75%) when the solution starts flowing out through the ope-
ning.
• Unscrew the filler neck, screw the valve insert back on, and
inflate the tyre to a pressure of 150 kPa (21,8 PSI).
Draining procedure:
• Move the machine to a firm base. The filling valves should be
in the extreme lower position. Secure the drum with blocks
on both sides.
• Unscrew the removable valve insert and let the solution
flow out.
The solution can spurt out after unscrew-
ing the valve insert.
• As soon as the solution does not flow out due to a decrease
in pressure, screw on the filler neck and inflate the tyre to a
pressure of 150 kPa (21,8 PSI).
• After the tyre has been inflated, remove the filler neck and
screw the valve insert back on.
Protect your eyes with glasses (face shield)
and your hands with rubber gloves!
Add calcium chloride CaCl
2
to water, never
vice versa!
Wash away spilled solution with clean
water.
Solution may never come into contact
with metal parts and wiring.