WARNING - THE MVP30 SYSTEM SHOULD
ONLY BE OPERATED BY TRAINED
PERSONNEL
Winch hardware is microprocessor controlled with local and
remote modes of operation. Ensure that personnel are clear of
all moving parts whenever main power is ON.
WARNING:
The Control Box and the Controller Interface Box in the lab must be
turned OFF whenever working on the tow cable and cabling in the Free
Fall Fish. High Voltage is present in these cables.
If the winch is to be operated in Hand mode with the Power Module
or sensor disconnected from the tow cable, the Controller Interface Box
in the lab must be turned OFF.
If the end of the tow cable is to be submerged, ensure a dummy plug is
connected to the end of the tow cable to eliminate damage to the
connector and cable.
