41
AMIX
AFFseries-3
Network setting
Subnet mask:
This is the subnet mask in which the device is located
Server IP Address:
Enter here the IP address of the master AFF to be duplicated.
Be careful, you cannot have more than three displays in slave mode from a master display (or limiter).
Enslave Display:
Enable to activate this function and Disable to cancel it.
Slave mode:
Allows to download and duplicate on this slave AFF, the copy of the display of a master
AFF. Function available from version 1.9 included.
Default gateway:
A logical entity that connects two computer networks.
DNS SERVER:
DNS (Domain Name Service), a service for translating a domain name into information.
Next
WEB INTERFACE
Do not forget to validate your settings by
clicking
SAVE
Hostname :
This is the name of the equipment on the network , for example AFF25-3.
Identification:
MAC address:
(Media Access Control) it is a unique and stored physical identifier, to identify the
equipment numbers and the manufacturer.
Use the following IP address:
INFO:
For example for EC:D9:25:01:1C:94, the first group in decimal hex EC: D9: 25 is the login given
by the international authority for the Rami and AMIX manufacturings, the last group 11C94 is the
conversion to the decimal Hexa of the serial number 72852.
IP address:
The factory IP address is 192.168.0.122, if you want to change this address, click directly in
the box and edit the numbers.
- After IP modification, enter new AFFseries IP address in your browser address window and validate.
- IP address should be unique in the net.
Attention :
Example1 :
If router IP is 192.168. .1 then AFF IP will be: 192.168. .xxx (xxx between 2 and 254)
1
1
Exemple2 :
Choose an IP for AFF. It should be under the same net as your router
If router IP is192.168. .1 then AFF IP will be: 192.168. .xxx (xxx between 2 and 254)
0
0
