32
AMIX
AFFseries-3
UPDATE PROCEDURE
B -
In a second step, please switch off the device. Insert a USB memory stick loaded with the supplied
"DISPLAY.hex" le into the USB A connector on the right side of the unit.
The display will switch to "Update" mode and will show the letters "
" in blue.
BO
Once the download is complete, the display color will change to green.
To download the update, press the "IP control" button on the side of the device with a pointed tool
and turn on the device while keeping the "IP control" button pressed until the device starts up.
A -
First, connect to the web server. To do this, connect a network cable (RJ45) between the rear panel of
the device and your PC. Enter the IP address:
(factory setting) in your web browser.
192.168.0.122
The web server is displayed.
The update of the AFFseries-3 display is done in two steps:
Go to the "Reboot & Update" tab, then "Server Update".
Click on the "Browse..." button to download the
"WebImg.bin" le we have provided you with.
Then click on the "Update" button. The download is
done.
To verify that the update is done, once on the "Home"
page, check if the "Server Version" corresponds to the
name of the version we sent you.
Enter the "Username" and "Password" and click
"Ok".
Factory settings:
User name:
admin
Password:
0000
AFFseries-3
IP control
