Amit TE1088 Скачать руководство пользователя страница 54

Страница: 54 / 135

Chapter 3 - Using the Web Configuration Server

Figure 21: Primary Setup - PPPoE

The Setup page for PPPoE includes the following parameters:

Table 18: PPP over Ethernet Parameters

Parameter

Description

PPPoE Account

The account assigned to you by your ISP.

PPPoE Password

The password assigned to you by your ISP. This field always

appears blank. If you don't want to change the password,

leave it empty.

Primary DNS

The DNS provided by your ISP. To use a specific DNS, enter

a specific address. Leave the default 0.0.0.0 setting to

automatically assign the parameter.

Secondary DNS

The backup DNS provided by your ISP. (optional)

Maximum Idle Time

The amount of time of inactivity before disconnecting your

PPPoE session. To disable this feature, set this parameter to

0 seconds, or enable Auto-reconnect.

The Maximum Idle Time is applicable only when Connection

Control is set to Connect-on-demand or to Manually.

Connection Control

Authentication for IP allocation. Select one of the following

options:

Connect-on-demand – An IP address is automatically

allocated whenever the user attempts to make a

connection.

Auto reconnect(Always-on) – The system automatically

connects to the ISP after restart or after connection is

dropped.

Manually – The user manually performs the connection.

Maximum Transmission Unit

(MTU)

Most ISPs provide an MTU value to users. The maximum

MTU value allowed is 1492 bytes.

More >>

Click to display the following parameters:

PPPoE Service Name (optional) - Directs to a PPPoE

server.

Assigned IP Address (optional) – The fixed IP assigned

by the ISP.

Using the Web Configuration Server

Содержание TE1088








































































































































Результаты поиска

Содержание TE1088

Отзывы:

Amit TE1088, Системное руководство, Страница: 54 / 135

Результаты поиска

Содержание TE1088

Отзывы: