Amit TE1088, Системное руководство, Страница: 48 / 135

Chapter 3 - Using the Web Configuration Server
NOTE
The WAN setup window is read only for user level entry.
From the WAN Setup window you can:
„
Set the WAN type – allows to select the WAN connection type of your
ISP.
„
NAT – Enable/Disable - When disabled, the gateway functions as a
regular router as opposed to a NAT router. This option is available in the
Primary Setup window for all WAN types.
„
Set Virtual Computers (Administrators only) – Enabled when using NAT.
In addition to the primary WAN address, enables to set up one-to-one
mapping of up to five global IP address and local IP address (see Figure
16 below).
Figure 16: Virtual Computers
The Virtual Computers window includes the following parameters:
Table 14: Virtual Computers Parameters
Parameter Description
Global IP Enter the global IP address assigned by the service provider.
Local IP Enter the local IP address of your LAN PC corresponding to
the global IP address.
Enable Check/Uncheck this item to enable/disable the Virtual
Computer feature.
Using the Web Configuration Server
34