FREE
WHEELING
NORM
AL
OPERATING THE
AMIGO SHOPPER
Shopper Handle Controls
The Shopper handle includes forward/reverse
hand control levers, battery gauge and diagnostic
light LEDs (Figure 1). The Amigo Shopper should be
parked and turned “OFF” while not in use.
For Store Personnel Only:
Manually Moving the ValueShopper
Manually Moving the SmartShopper
Figure 3
SmartShopper
Manual Brake Lever
(located on rear cover)
Figure 2
Figure 1
2
1
3
3
4
1. Stand and face forward on either side of basket.
2. Bend down slightly grabbing hold of front side of basket.
3. Keep arm extended straight then pull upward lifting front
of vehicle off ground 1-2". Move as desired.
Forward
Reverse
Figure 1:
1 Diagnostic light LEDs
2 On/off rocker switch or key
3 Forward & reverse hand control levers
4 Battery gauge
Driving
Driver must be seated to engage seat switch and operate cart. To
move forward, pull the right side to the hand control lever toward
you (Figure 2) or by pushing the left side of the hand control lever
away from you. By releasing the control lever, you will roll to a stop.
To operate in reverse, pull the left side of the hand control lever
toward you or push the right side control lever away from you.
1. Locate manual brake lever on rear cover.
2. Push manual brake lever forward to engage freewheeling mode.
a. While in freewheeling, unit must be pushed slowly to avoid
activating safety feature "push to fast."
3. To terminate freewheeling, pull manual brake lever toward
rear of Amigo (Figure 3). Do not drive Amigo while in
freewheeling mode.
3
www.amigoshopper.com
RESUME NORMAL DRIVE USE OR TRANSFER ON/OFF THE AMIGO ONLY
WHEN IN "NORMAL" MODE.
