AMICOCIRC AMICO 20-4-130, Руководство пользователя

Страница: 9 / 13

15
SetUp Pump features Function
AUTO
Factory setting
Max. to Min. pro-
portional pressure
curve
Autoadaptation Mode the performance of pump
can be controller within specified range auto-
matically and pump performance can be ad-
justed as per system scale.
PP1
Min. Proportional
pressure curve
The PP1 function allows the pump to work at a
lower pressure range (as shown in the graph).
The pressure curve is proportional according to
the flow required by the system; when demand
increases, also pump pressure increases.
PP2
Max. Proportional
pressure curve
The PP2 function allows the pump to work at a
medium pressure range (as shown in the
graph). The pressure curve is proportional ac-
cording to the flow required by the system;
when demand increases, also pump pressure
increases.
CP1
Min. constant
pressure curve
The CP1 mode allows the pump, in function of
the required flow, to work at constant pressure
close to the minimum (as reported in the
graph).
CP2
Max. constant
pressure curve
The CP2 mode allows the pump, in function of
the required flow, to work at constant pressure
close to the maximum (as reported in the
graph).
S1 - I Speed I
The pump maintains minimum speed (III) set
by the operator, in any working condition.
S2 - II Speed II
The pump maintains averange speed (II) set by
the operator, in any working condition.
S3 - III Speed III
The pump maintains maximum speed (I) set by
the operator, in any working condition.
Night Mode
As long as specific conditions are met, Amico
will switch to Auto Night Mode and it wil lrune-
nergy saving.
2.4 Pump Body and Heat Insulation System
The "system temperature" must be higher than the "environment tem-
perature", to avoid an excessive condensation on the pump housing.
Please refer to the temperature instructions on the product label.
WARNING!
Do not insulate or cover the junction box and the
control panel.
(Strictly avoid isolating the electronic pump head)
6