AMICOCIRC AMICO 20-4-130, Руководство пользователя

Страница: 4 / 13

Cautions
1. Read and understand this user manual before installation and opera-
tion of the product.
2. The warning sign marks notes whose non-observance will endanger
your health or the functioning of the device.
3. The user has to rely on a qualified staff, able to fully understand the
electrical regulations and this manual.
4. Do not install the pump in a damp place or where may be water
splashes.
5. For easy maintenance, shut-off valves should be installed in both
suction and discharge lines.
6. During installation and maintenance, we recommend to cut off the
pump power supply.
7. It is strictly forbidden to start the pump without pumping liquid.
8. Always shut down the pump before touching or proceeding with any
intervention on it. Allow all system and pump components to cool, be-
fore you handle them.
9. Please pay attention to ventilation in case of moisture condensation,
causing electrical fault.
10. At low temperatures, we recommend to remove the liquid inside the
pipelines to avoid cracking.
11. In the perspective of long periods of inactivity, make sure to close the
inlet and outlet valves.
12. If the supply cord or the plug are damaged, please ask a qualified
centre to replace them.
13. If the temperature of the pump is greater than the value of name-
plate, remove the power, disconnect the pump through the valves on
the pipeline, and please contact your local dealer or service.
14. If you are unable to find a solution to a potential problem, please con-
tact your local support centre.
15. Keep out of reach of children.
16. Install the pump in a dry and well ventilated area.
17. The network and relative outlets must be fitted with an efficient
earthing connection following the laws in force on the matter of elec-
trical systems.
1
20
Thank you for purchasing this pump, designed and ma-
nufactured to exacting high standards, and
to confer safety and high quality performance.
The legal guarantee starts from the date of purchase and
does not cover damage caused by improper use and/or
tampering not expressly indicated in this manual.
For warranty, fill out the following form.
Model
Number
Invoice numb. or receipt (staplehere the sales receipt)
Date of purchase
Place of purchase
Problem
Warranty
Amico Circulator
Warranty certificate