Amico Go Lift Portable 450, Инструкция по установке и эксплуатации

Страница: 10 / 28

10 Amico Mobility Solutions Corporation
Installing the GoLift Portable in the Amico PLP Track
3. By using an adjustable wrench, remove the end stopper on the
PLP track by loosening the bolts.
4. Fasten the end stops back on to the PLP track. Ensure there is enough clearance room to place the end cap on the
PLP arm and place the end cap back on the arm.
5. Fasten all end stops tightly using an adjustable wrench.
!
NOTE: If you are installing the Amico GoLift Portable in an existing track system you must ensure that the max
load of the track system is equal or higher than the max load of the Amico GoLift Portable.
6. To disconnect the lift from the trolley, open up the hook in the carabiner to release.
Installing the Endstop on the Amico Track
Amico Track Endstop
Use a 3/16 Allen key to
secure the endstop to
the track.