Amico AH7500E, Руководство пользователя

Страница: 21 / 50

20
PRE-OPERATION CHECK
ENGINE OIL
Engine oil is a major factor affecting engine performance and
service life. Non-detergent oils and 2-stroke engine oils are not
recommended because they have inadequate lubricating
characteristics.
Check the oil level BEFORE EACH USE with the engine on a level
surface and the engine stopped.
Use 4-stroke motor oil that meets
or exceeds the requirements for
APl service classification SF or
SG. Always check the APl
SERVICE label on the oil container
to be sure it includes the letters SF
or SG.
SAE 10W-30 is recommended for general use. Other viscosities shown in
the chart may be used when the average temperature in your area is within
the indicated range.
Other viscosities shown in the chart may be used when the average
temperature in your area is within the indicated range.
1. Place the engine on a level surface.
2. Remove the dipstick and wipe it clean.
3. Fully insert the dipstick, then remove it to check the oil level.
4. If the oil level is near or below the lower limit mark on the dipstick,
remove the oil filler cap, and fill with the recommended oil to the upper
limit mark.
5. Reinstall the filler cap with dipstic.
NOTICE
FILLER CAP