34
Connecting the water inlet hose(for cold water)
Connection the cold water supply hose to a threaded 3/4(inch) connector and make
sure that it is fastened tightly in place. If the water hoses are new or have not been used for
an extended period of time, let the water run to make sure that the water is clear and free
of impurities, If this precaution is not taken, there is a risk that the water inlet can get
blocked and the appliance could be damaged.
Electrical connection Make sure the socket is compatible with the plug
of the appliance, The socket must have earthing wire, and can hold
250V/10A, otherwise damage or accidence may occur, Other electric ap-
pliance with big power can not use the same socket with the dishwasher.
5
Tension Adjustment of the Door Spring
After placed the panel on the dishwasher, please try open and close the door to test the ba-
lance to check out whether the door can remain a same place. If not, please adjusting the
screw in the direction of clockwise or counter-clockwise to.
4
30°~9 0°bal ance
Hexnut tools
CR-V 4mm