Amica KMI PB 4VI513FTB4WC Series, Инструкция по эксплуатации

Страница: 26 / 76

26
OPERATION
The residual heat indicator
Once a hot cooking zone is switched off, " " is displayed on the relevant cooking zone's
display to warn that the "cooking zone is still hot!" Depending on the cooking zone heat level,
1, 2 or 3 rings may light up. The last ring goes out when the temperature is lower than 60°C.
Do not touch the cooking zone at this time owing to the risk of burns from re-
sidual heat, and do not place any object on it which is sensitive to heat!
When the residual heat indicator goes out, cooking zone can be touched, however keep in
mind that it may still be warmer than ambient temperature.
When there is no power, the residual heat indicator does not light up.
Limit the operating time
In order to increase efficiency, the induction
hob is fitted with a operating time limiter for
each of the cooking zones. The maximum
operating time is set according to the last
heat setting selected.
If you do not change the heat setting for a long
time (see table) then the associated cooking
zone is automatically switched off and the
residual heat indicator is activated. However,
you can switch on and operate individual
cooking zones at any time in accordance with
the operating instructions.
Cooking heat
setting
Maximum op-
erating time
(hours)
2
1 6
2 6
3 5
4 5
5 4
6 1.5
7 1.5
8 1.5
9 1.5
P 0.16