- 81 -
Step 4. Dishwasher installation steps
For other installation steps please see the installation instruction draw-
ings
1. Place the condensation strip under the cabinet worktop. Make sure
that the condensation strip is flush with the edge of the worktop. (Step
2).
2. Connect the water supply hose to the cold water tap.
3. Connect the water drainage hose.
4. Connect the power supply cord.
5. Place the dishwasher in place. (Step 4)
6. Level the dishwasher. The rear feet can be adjusted from the front of
the dishwasher by using the wrench to turn the hex screw in the centre
of the dishwasher base. In order to adjust the front feet, use a flat head
screwdriver and rotate the front feet until the dishwasher is level.
7. Attach the furniture door to the dishwasher door.
8. Adjust the tension of the door springs using the Allen key. Tighten
the spring to the left. Failure to make the adjustments can damage the
dishwasher.
9. The dishwasher must be fixed. This can be done in two ways:
A. MDF Worktop: Insert the mounting hook into the hole on the side
panel and fix it to the worktop with screws.
B. Worktop made of marble or granite: Attach the side with the screw.
*In selected dishwasher models there are gaskets to be installed around
the appliance (optional).
NOTE: Always ensure that there is a sufficient gap between metal furni
-
ture components such as handles, fittings, furniture fronts and the sur
-
face of the control panel buttons. If the gap is insufficient, functions may
be triggered inadvertently and the dishwasher may malfunction.