17
INSTALLATION
Fig.
Surface burners applied do not require adjust-
ment of primary air. A correct flame has dis
-
tinct internal cones of blue and green colour.
A short, humming flame or long, yellow and
smoking one, without clearly outlined cones,
shows improper quality of gas in the house-
hold piping or a damaged or soiled burner.
In order to check a flame, heat a burner for
around 10 minutes with a full flame, and next
turn the valve knob to the economical flame
position. The flame should not go out or jump
onto the nozzles.
In cookers with a safety device, a knob with
a surface burner safety valve is used, fig.
Knobs should be adjusted with the burner
switched on and set to the economical flame
position, using an adjustment screwdriver of
the 2.5 mm size.
Caution!
After adjustment is completed, place
a label indicating the type of gas to
which the cooker is now adapted.
A professional installer must adjust the small
flame on-site in your home. The adjustment
depends on the type of gas and its pres-
sure.
Содержание 6017GG5.33HZpMsFGQ
Страница 1: ...IOAK 2426 8054088 05 2014 1 6017GG5 33HZpMsFGQ W 6017GG5 33HZpMsFGQ Xx INSTRUCTION MANUAL GAS COOKER ...
Страница 12: ...12 SPECIFICATIONS OF THE APPLIANCE Oven fittings Grill grate drying rack Roasting tray ...
Страница 31: ...31 ...
Страница 32: ...Service Help Line For the UK please call 0844 815 8880 0818 46 46 46 For Ireland please call ...