30
If the problem is not solved, disconnect the power supply and report the fault.
Important!
All repairs must be performed by qualified service technicians.
TROUBLESHOOTING
In the event of an emergency, you should:
switch off all working units of the cooker
disconnect the mains plug
call the service centre
some minor faults can be fixed by referring to the instructions given in the table below.
Before calling the customer support centre or the service centre check the following points
that are presented in the table.
PROBLEM
1. electrical fittings do not
work
2. the programmer display
is flashing “0.00”.
3. the oven lighting does
not work
REASON
break in power supply
the appliance was discon-
nected from the mains or
there was a temporary
power cut.
the bulb is loose or dama-
ged
ACTION
check the household fuse
box, if there is a blown fuse
replace it with a new one
set the current time
(see ‘
Use of the program
-
mer’
).
tighten up or replace the
blown bulb (see Chapter
Cleaning and Maintenance)