Amica 12243.3ePaTePrDScJNkUtX, Инструкция по эксплуатации

Страница: 23 / 76

23
OPERATION
End a pre-set programme.
When a pre-set programme ends, you will
hear beeping.
ECO function
When you select the ECO programme, the
ECO indicator is on. During ECO operation,
the oven lighting is switched off by default,
but you can touch to turn lighting on for
10 seconds. It is not possible to turn on the
lighting permanently.
Quick pre-heat
You can use the quick pre-heat function to
quickly pre-heat the oven.
Touch when
the appliance is on. When quick pre-heat is
on, the heating function sensors and the
sensor are illuminated. The oven heats at its
maximum power.The quick pre-heat function
is available with all heating functions except
the Defrost and Cleaning functions — for
these functions, you will only hear a beep.
When the set temperature is reached, you
will hear a beep. The temperature will be
maintained according to the selected func-
tion.
Touch
to deactivate the function at any
time.
The Soft Steam function
The appliance has the Soft Steam feature (
). Steam is produced at the beginning of
the baking process, which enhances some
of the dishes prepared in the oven. There is
a cavity in the bottom of the oven to be filled
with 150 ml of clean cold water before heat-
ing the oven. Do not add spices to the water.
When the appliance is on, touch
to ac-
tive the Soft Steam function. When the oven
is preheated (after about 5 minutes), place
the dish inside the oven and close the door.
Note: Do not leave any water in the oven cav-
ity. When the oven has cooled down, soak up
the water with a cloth.
Make sure that the oven has cooled before
removing water.
Due to the presence of steam in the oven
cavity, water may condense on the inside of
the oven door and walls when baking. Wipe
off excess water each time after you have
finished cooking.