Amibot Spirit MOTION, Руководство пользователя

Страница: 21 / 236

EN
19
Operating the appliance
Cleaning modes
The robot has five cleaning modes. These modes can be selected
using the remote control. AUTO mode can also be selected on the
top of the robot.
NOTES :
•
If you wish to use the robot on a daily basis, make sure the home base is turned
on and that the robot’s power sensors are in contact with the home base's
contacts.
• To perform a scheduled clean, the robot must be out of standby mode and
must not be in operation. If this is the case, you must pause it.
• Scheduled cleaning and the remote control times are cancelled when the
batteries are changed. Reset the time and scheduled cleaning time as above.
Press the AUTO button on the robot or on the remote control. The
robot uses its camera to scan the room to optimise its movements. It
divides the room into areas in a zig-zag fashion to vacuum any debris
and dust. During an AUTO mode cleaning cycle, the robot may take
a short break, so it can scan the room in real time and adapt its
movements.
NOTES :
•
If the robot is paused during an AUTO mode cleaning cycle in order to be
controlled via the remote control, the cleaning history of the current cycle is
lost. To relaunch the automatic cycle, press the AUTO button. The robot will
scan the room again. Cleaned areas may be cleaned again.