Amibot Spirit LASER, Руководство пользователя

Страница: 34 / 216

32
Troubleshooting
EN
No. Problem Cause Solution
01
The appliance
does not switch
on.
1. The appliance is not
switched on.
2. The appliance has
run out of battery.
1. Switch the power button
to ON.
2. Charge the robot using its
home base or plug it in to
the power cable.
02
The robot does
not charge any
more.
1. The robot is not
correctly positioned
on the home base or
it is not plugged in
correctly.
2. The robot is not
switched on.
1. Correctly reposition
the robot and place its
power sensors on the
home base sensors.
2. Switch the robot on by
pressing the ON/OFF
power button.
03
The robot
does not move
correctly
1. The floor is wet.
2. The dust bin is not
attached correctly.
3. The central brush
is not inserted
correctly.
1. Dry the floor.
2. Remove and reinsert
the dust bin.
3. Remove and reinsert
the brush in its cavity.
04
Appliance
suction lost
1. The dust bin is full
2. The central brush or
the side brushes are
blocked.
1. Empty the dust bin,
clean the motor and the
filters.
2. Remove any hair
and debris from
the brushes. Check
that there is no dirt
obstructing the robot.