Amibot Spirit ICE, Руководство пользователя

Страница: 16 / 96

29
Troubleshooting
EN
28
Troubleshooting
EN
Please contact AMIBOT technical department in the following cases:
• If the appliance has been dropped, damaged or come into
contact with water.
• If the power cable is damaged.
• If the battery is defective.
Table: Malfunctions and possible causes
To avoid breakdowns/malfunctioning, regularly check and clean the
appliance accessories.
No. Malfunction Cause Solution
01
The appliance
does not switch
on.
1. The appliance is
not switched on.
2. The appliance
has run out of
battery.
1. Switch the power button to
ON.
2. Charge the robot using its
home base or plug it in to
the power cable.
02
The robot does
not move cor-
rectly
1. The floor is wet.
2. The dust bin is
not attached
correctly.
3. The central brush
is not inserted
correctly.
1. Dry the floor.
2. Remove and reinsert the
dust bin.
3. Remove and reinsert the
brush in its cavity.
If none of the above-mentioned steps provide a solution for your
problem, please contact the AMIBOT after-sales department.
03
Appliance
suction lost
1. The dust bin is
full.
2. The central
brush or the
side brushes are
blocked.
1. Empty the dust bin, clean
the motor and the filters.
2. Remove any hair and
debris from the brushes.
Check that there is no dirt
obstructing the robot.
04
The appliance
is hard to
manoeuvre.
1. The wheels are
jammed.
1. Clean the vacuum wheels
and remove the hair and
other debris caught up
around them.
05
The remote
control does
not work
1. The batteries
are not inserted
or need to be
replaced.
2. The remote
control is broken.
1. Change the batteries.
2. Replace the remote control
for a new one.