amiad ADI-X IOM Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 83

background image

Amiad Water Systems - ADI-X IOM 910101-001180 / 06.2021

7

1

Safety Instructions

1.1

General

The manufacturer's filtration products always operate as components in a larger system. System
designers, installers and operators must comply with all relevant safety standards.
Prior to installation, operation, maintenance and/or any other type of action carried out on the
controller, carefully read these installation and operation instructions.
During installation, operation and/or maintenance of the controller all conventional safety
instructions must be observed in order to avoid danger to the workers, the public and/or to
property in the vicinity.
The system is for use for non-hazardous liquids only!
Please note: The filter controlled by the controller enters the flushing mode automatically without
any prior warning.
No change or modification to the equipment is permitted without written notification given by the
manufacturer or by its representative(s) on the manufacturer’s behalf.
Always observe standard safety instructions and good engineering practices whilst working in the
filter’s vicinity.
Use the controller only for its intended use as designed by the manufacturer only. Any misuse of
the controller may lead to damage and may affect your warranty coverage. Consult with the
manufacturer prior to any non-standard use of this equipment.
Do not carry out system cleaning and/or maintenance in an explosive atmosphere.

1.2

Installation

General

Install the controller according to the detailed installation instructions provided in this manual or in
the Quick Guide provided with the filter or controller.
Make sure to leave enough side and top clearance to enable easy access for safe maintenance
operations.
Make sure to have suitable lighting at the filter’s location to enable good visibility and safe
maintenance.
Arrange suitable platforms and safety barriers to enable easy and safe access to the controller
without needing to climb on pipes and other equipment. Verify that any platform, barrier, ladder,
or other such equipment is built, installed, and used in accordance with the relevant local
authorized standards.
Use only appropriate standard tools and equipment operated by qualified operators when
installing, operating, and maintaining the controller.
When installation is required in hazardous environment sites, underground or high above ground,
make sure that the site design and the auxiliary equipment are appropriate and that installation
procedures are carried out in accordance with the relevant standards and regulations.
Make sure walking areas around the installation are slip resistant when wet.

«
...
5
6
7
8
9
...
»

Содержание ADI-X IOM




















































































Отзывы:

Нет отзывов

Похожие инструкции для ADI-X IOM

Бренд: YASKAWA Страницы: 256

Бренд: Quectel Страницы: 23

Бренд: Quectel Страницы: 79

Бренд: Daikin Страницы: 48

Бренд: Daikin Страницы: 77

Бренд: Daikin Страницы: 32

Бренд: Daikin Страницы: 46

Бренд: Daikin Страницы: 14

Бренд: Daikin Страницы: 16

Бренд: Daikin Страницы: 1

Бренд: Galaxy Control Systems Страницы: 5

Бренд: Quinny Страницы: 29

Бренд: Quinny Страницы: 60

Бренд: Yealink Страницы: 8

Бренд: Vaillant Страницы: 12

Бренд: Balboa Water Group Страницы: 88

Бренд: ABB Страницы: 2

Бренд: Ezodo Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды