AMI AAA-N50W, Руководство по установке и инструкция по эксплуатации

Страница: 9 / 20

Installation Guide & Owner’s Manual – Under-the-Counter RO & Alkaline Drinking Water System
Copyright © 2019 WaterAnywhere.
All Rights Reserved.
Page 8
Step 2 - Faucet Installation
For this step, you will need:

Faucet assembly kit included with System

Tubing, cut to the appropriate length

Wrench
Install the faucet onto the
countertop/sink:

Find and identify all of the parts in the faucet bag, as
shown in the diagram.

Add the metal washer (2), and then the rubber seal
(3) onto the threaded nozzle of the faucet (1).

Place the faucet nozzle through the previously drilled
hole in the countertop or sink top, and let it rest on the
sink top.

From the underside of the sink, slide the washers
onto the threaded stem as shown in the diagram.
- (4) & (5) - made of rubber
- (6) - made of metal

Secure the assembly by threading on the locking nut
(7).

Check the orientation and alignment of the faucet and
washers, adjust as necessary, then use a wrench to
tighten the locking nut securely
Notice:
Do not overtighten fittings.
Install the Tubing

Slide the metal nut (10) over the end of the tubing
with the threads facing up.

Add the plastic clamp (9).

Press the plastic insert (8) into the end of the tubing.

Slide the tubing (until it stops) inside the faucet nozzle
and screw it in by hand with
the nut that was placed on
the tubing earlier (10).

Connect the other end of
the tubing to the elbow in
the “out” end of the mineral
filter.