AMI Marine QUARK-ELEC NMEA 0183, Руководство пользователя

Страница: 8 / 20

Quark-elec Manual
8 of 20 2022 V4.32
*
[1]
Swap NMEA + and NMEA- wires if the connection does not work.
QK-A032 wire RS232 device terminals
NMEA 0183
Output
NMEA GND *[2]
NMEA output- NMEA Input
NMEA 0183
Input
NMEA input+ GND *[2]
NMEA input- NMEA Output
* [2] Swap NMEA input and GND / NMEA output and GND wires if the connection does not work.
6.
Status LED’S
The A032 features three LEDs which indicate power, NMEA 2000 input and NMEA 0183 input status
respectively. The three LEDs turn on and then off after initialization. During normal operation, these
LEDs flash as below:
•
Power: Top LED (red) flashes at 3 second intervals.
•
NMEA 2000 INPUT
：
Middle LED (green) flashes for each valid NMEA 2000 PGN input.
•
NMEA 0183 INPUT
：
Bottom LED (green) flashes for every valid NMEA 0183 sentence input.
Please note: the NMEA LEDs flash when their respective data is received, not when data is converted
or sent.
Figure 4: LED functions
7. Configuration
The Windows configuration tool can be used to setup the NMEA 0183 baud rate and to change WiFi
settings.
The Configuration tool can be found on the free CD
The configuration tool instructions can be found on the free CD