Quark-elec Manual
11 of 20
2022
8.1. WiFi Ad-hoc mode
ON YOUR DEVICE (phone, laptop etc.):
About 15 seconds after the A032 has been powered up, a WiFi network with an SSID similar to
‘QK-
A032xxxx’ will appear in the available WiFi networks list.
Connect your device to the
‘
QK-A032xxxx
’
WiFi network with the default password:
‘
88888888
’
.
IN THE CHART SOFTWARE:
Set the protocol to
‘
TCP
’, IP address to
‘
192.168.1.100’
and the port number to
‘
2000
’.
With the above settings, a wireless connection should be established, and the user should be able to
receive and view data in the chart software.
Note: In Ad-hoc mode, the IP address should not be changed.
SSID and password can be changed using the configuration software; the password should be
between 8 to 12 characters long.
Data received through the wireless connection can be monitored using TCP/IP port monitoring software
as shown below:
Figure 5: TCP/IP Net Assistant
Device SSID
Similar to ‘QK-A032xxxx’
WiFi password
88888888
Protocol
TCP
IP address
192.168.1.100
Data Port
2000
