MAN-X5L-ENG-01
11
ⓒ
2016 All Material Handling
10.0 TROUBLE SHOUTING
Trouble
Cause
Cure
Hand Wheel (33)
does not move in or
out
Selector not in neutral “N” position
Move Selector to neutral “N”
Hoist is loaded
Never attempt to pull hand wheel
out when the hoist is loaded.
Improper assembly
Requires service for repair
Free chain mode
does not allow chain
to be pulled freely
Chain pulled too fast or accelerated
too quickly causing the brake to set
Reset the hand wheel (33) and pull
load chain with less force
Assembly of outer brake spring (34)
may be preloaded in excess of 120º
Requires service for repair.
Hoist will not lift or
lower at no load
Brake is not set
See section 1.0 OPERATION in
this manual: instructions 5 and 6
Lever moves without clicking, chain
does not continue to move in or out
There must be some resistance to
cause the lever to ratchet. Hold or
pull the slack chain by hand while
ratcheting the lever. Or, use the
free chain mode to easily position
the chain.
Improper assembly of brake
components between the hand wheel
(33) and brake driver (22)
Requires service for repair.
Re-assemble components
between the hand wheel (33) and
brake driver (22) per instruction
and illustration in section 9.0
ASSEMBLY in this manual.
Hoist will not lift.
No clicking when
lever is rotated in up
direction
Pawls (17) not engaging the brake
disc (20). Due to spring failure,
corrosion or contamination
Requires service for repair. Clean
and inspect pawl and spring for
proper function.
Up, Dn Selector is not indexed
correctly or spring (25) missing
Requires service for repair. Clean
and inspect parts and assure
proper assembly
Bottom hook (80) and slack end pull
handle (16) are assembled on the
wrong end of the chain.
Requires service for repair.
Looking at the lever end, the
bottom hook (80) should be on the
left side and the Pull handle (16)
on the right.,
Continued on next page
