AMGO SPL-6, Инструкция по установке и обслуживанию

Страница: 11 / 29

9
G. Install electrical system
Connect the power source on the data plate of power unit.
Note: For the safety of operators, the power wiring must contact the earth well.
Single phase motor
1. Power supply wires (active wire L and neutral wire N ) to terminals of AC
contactor marked L1, L3 respectively. Circuit diagram
2. Connecting the earth wire terminal of the motor
.
H. Install lifting arms
Lifting the carriages to the suitable position,and then joint the arm to the carriage,used the
snap ring to limited the position after the PIN inserted completely and go though to bottom.
Fig. 16
Fig.17
70
69
64