Page 4 of 16
AMG Sicherheitstechnik GmbH
Industriepark Straße A-9
39245 Gommern
Telefon 039200-7797-0
Freecall 0800-2264264*
Fax 039200-7797-29
Business hours are 8-17 clock,outside this timean answering machine is switched
*) free of charge from the german fixed network and all german mobile networks
The left switch # 1 is for sensitivity adjustment: house (switch down) and car (switch
up). When using the CarPro-Tec® GPS infrasound sensor in large rooms, a higher
sensitivity is required.
CarPro-Tec® GPS off / alarm module
To turn off the alarm module, simply turn switch 3 back on.
To deactivate the GPS module as well, unplug the mains plug from the USB socket and
hold down the buttons "GPS On" and "Alarm Test" for at least 3 seconds.
Activation of the GPS module
The GPS module starts automatically when power is connected. If you want to start it
already without power connection, press the side button "GPS on" for one second.
3.
Front view of CarPro-Tec® GPS - LEDs
view
Explanation of all LEDs
Power-LED=device in operation
Ready for learning process
armed
Triggering a sensor => left
red LED flashes
Learning process succesful =
orange LED goes out
Bild 4
LED – area
- Slide the Dipp switch 3 downwards (see above
picture 2)
- "GPS ON" - Switch the GPS function on the left
side by pressing a button with the help of a pointed
object -> right green LED turns on (see front
section 2)
Alarm test -> for triggering a test alarm to check
the alarm info forwarding
