General Description
AngelShark
Internal M.2 PCIe SSD Expansion Carrier Board for Apple Mac Pro (Late 2013)
Hardware Manual, Revision 1.0
Page 2
2
General Description
2.1
Introduction
AngelShark
Internal M.2 SSD Expansion Carrier Board is designed
to allow the user (of a Mac Pro, Late 2013) to add one or two
additional M.2 PCIe SSD modules while keeping their original Mac
SSD module. The elegant solution allows the user to do this
internally, without having to add external equipment which is both
bulky and not cost-effective.
The
AngelShark
Carrier Board
™ goes between the Mac and the
original SSD Module, while allowing for expansion with up to two
more M.2 PCIe SSD modules
(user’s choice).
The Carrier Board supports any M.2 PCI Express (M-key) SSD
modules with standard lengths 2260, 2280, or 22110.
2.2
System requirements
Apple Mac Pro (Later 2013)
2.3
Package Contents
Carrier Board package (depending on the SKU part number) includes the
following parts:
1.
AngelShark
Carrier Board
™
2. Screwdriver with bit set for supporting Carrier Board installation.
(Torx T8s bit, Phillips #000 bit, Phillips #1 bit, Slotted bit)
3. Power Standoffs (2 pcs + 1 extra)
4. Power Screws (2 pcs + 2 extra)
5. Mounting Screws (6 pcs + 2 extra)
6. M.2 SSD Heat Sink
