Installation
AngelShark
Internal M.2 PCIe SSD Expansion Carrier Board for Apple Mac Pro (Late 2013)
Hardware Manual, Revision 1.0
Page
11
Mounting the
AngelShark
Carrier Board
™
13) Carefully insert the carrier board directly into the Mac PRO PCIe slot
until it pops into place, as shown.
14)
Align the carrier board’s yellow hole (in the center) with the
appropriate Mac Pro hole, behind it.
15) Use the screwdriver with T8s bit (item #2) to insert the original black
screw (which you removed in Step 3), as shown. DO NOT TIGHTEN.
