BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL BUZZARD V2
27
GYRO CALIBRATION
If the helicopter yaws a lot, land it and calibrate the gyro.
To calibrate the gyro, the helicopter must be on level ground.
The indicator light on the helicopter flashes during the
calibration process. Once the LED is constantly lit, the
calibration is complete.
UNLOCK/LOCK
After the connection is made, press the two levers down/out for one second to unlock the helicopter.
Push the throttle forward, the helicopter will take off and hover at a height of about one metre.
ONE-BUTTON TAKE-OFF/LANDING
Press the button at the top right and the helicopter will take off and hover at a height of about one
metre. To land the helicopter, press the button again and the helicopter will slowly sink to the ground
and stop the engines.
EMERGENCY STOP
If you ever need to get the helicopter out of control, press the two upper, outer buttons
simultaneously. The motors will stop immediately. Please remember that if the helicopter is at too
high an altitude, it will be damaged in a crash. NEVER USE THE EMERGENCY STOP FUNCTION IN NON-
HAZARDOUS SITUATIONS.
