Ametek TRACE ANALYTICAL ta5000R, Руководство пользователя

Страница: 38 / 50

38 | Model ta5000R Gas Purity Monitor
Diagnostic Print Key
The Print key appears when setting the clock. Pressing the Print key from
this page will print a complete report of all system settings, calibration
settings, temperatures and status and the chromatogram from the last
run of the analyzer. This is a system diagnostic tool which can be used to
troubleshoot problems with the analyzer.
Saving changes into Non-Volatile RAM
After changes have been made to any of these fields the system LED will
turn red. This indicates that there is a system error or system state change.
Use the Page key to move to the System Settings page. Any change made
will be shown under the System Errors line. Use the arrow keys to move
the cursor in front of the change you wish to accept and press the key
under the
Accept menu label.
Next, press the Save key to save the accepted changes into Non-Volatile
RAM. The instrument must be in “Idle” mode to accept the changes.
After changes have been made to any of these fields the system LED
will turn red. This indicates that there is a system error or system
state change.
Temperatures and Status Page
Pressing the Page key twice will display the Temperatures and Status
Page. This page shows status information about the critical heated zones
and status of the detector. No user input is allowed on this page in nor-
mal user mode.
Image of Temperatures and Status Screen
!
CAUTION
Temperatures & Status
Idle Mode 12:34:25
Page
Meas Set
RGD Bed = 265 # 265
RGD Column = 128 # 130
RGD Lamp = On
RGD Vout = 36187
RGD Vsig = 1978.4
------------------------- Pressure --------------------------
Carrier = 20.3