Ametek Surtronic 25, Руководство пользователя

Страница: 20 / 60

Surtronic S25
Figure 4
The holder will hold the pick-up at right angles to the drive shaft
when it is pivoted away from the surface (eg while changing the
work piece).
Connector.
The connector of the pick-up lead is screwed into the
end of the pick-up and is then inserted into the end of the pick-up
holder, with the lead coming out through the slot in the holder.
It is advisable to connect the lead to the display-traverse unit first
and then the pick-up. To connect the pick-up to the display-
traverse unit: the pick-up has 2 threaded ends with location pins.
Insert the location pin securely into the Surtronic body and tighten
the threaded collar.
When the extension rod is used, the short pick-up lead is not
required and the end of the rod itself is inserted into the holder.
Pick-up.
The pick-up is a variable inductive type transducer,
which is supported on the surface to be measured by a skid, a
curved support projecting from the underside of the pick-up in the
vicinity of the stylus. As the pick-up traverses across the surface,
Page 2-6