SA-20-AR User Manual
______________________________________________________________________________
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com
7
Example: Telnet to default IP address of
192.168.1.254
on default Port
23
:
SurgeX Axess Ready v1.01.41
User> admin
Password> *****
Axess Ready> set ipaddress 10.1.2.69
Ok
Axess Ready Reboot Required> set subnet 255.255.255.0
Ok
Axess Ready Reboot Required> set gateway 10.1.2.1
Ok
Axess Ready Reboot Required> reboot
The CLI command
set ipmode dhcp
followed by a
reboot
command may be used to
configure the AR to automatically acquire its network settings from a DHCP server. A
DHCP server will automatically assign an IP address (dynamic address), as well as the
Subnet Mask and Gateway.
To determine what IP address has been automatically assigned by the DHCP server, you
will need to use the Discover feature of the DMU or query your DHCP server and locate
the MAC address of the AR in the DHCP server’s IP/MAC table.
o
Web: To set the IP address using a web browser, navigate to the current IP address of the
AR. Enter the administrator credentials (Factory Default User:
admin
, Password:
admin
), click on “Setup”, then click on “Network” and follow the directions in the Web
Server/Network/Setup section of this manual.
