Ametek SURAGEX AXESS Reasy FLATPAK SA-82-AR, Руководство по установке оборудования

Страница: 18 / 26

© AMETEK Electronic Systems Protection, Inc. | Technical Support: 800-645-9721 | surgex.com 17
SA-82-AR User Manual
_________________________________________________________________________________________________________________________
5. AutoPing Commands
Command Description Admin Fact Def
get autoping Returns all AutoPing settings currently in use. Example:
AutoPing 1
AutoPing 2
IP Address: 10.1.2.36 0.0.0.0
Frequency: 60 10
Fail Count: 3 3
Status: OK OK
Trigger Count: 0 0
--------------------------------------
Mode: Single Action:
On-Latch
Yes
set autoping < 1 | 2 > address < dotted decimal > Sets the IP address to be pinged for AutoPing 1 or 2. Yes 0.0.0.0
set autoping < 1 | 2 > frequency < 1-999 > Sets the frequency (how often the ping is sent) for
AutoPing 1 or 2 in seconds.
Yes 10
set autoping < 1 | 2 > failcount < 1-999 > Sets the number of consecutive failures the AutoPings must detect
before the AutoPing considers the pinged device to be failed.
Yes 3
set autoping mode < single | and | or > Sets single AutoPing (AutoPing 1) or two AutoPing relationship
AND or OR. Yes AND
set autoping action < none | on-latch | on-follow | off-latch |
off-follow | cycle | cycle-once >
Sets the action to be performed when the AutoPing is triggered. Yes None
set autoping cycle <0-999>
Sets the maximum number of power cycles when the AutoPing
triggers. 0 = Unlimited
Yes 1
set autoping restart <1-999> Sets the delay in seconds to restart AutoPing tests after Action. Yes 0
6. User Commands
Command Description Admin Fact Def
set password < user | admin > < old > < new > < repeat > Sets the password of the User or Administrator. Yes user | admin
set user account <yes | no> Sets whether or not a user account is used. Yes No
set login required <yes | no> Sets whether or not a login is required for user level operation. A login
is always required for admin functions.
Yes Yes