Ametek Reichert r2i300, Руководство пользователя

Страница: 12 / 16

9
Printer Interface
- Using the supplied Null modem cable connect the cable to the rear of the printer and the
instrument where indicated by COM2/PRINTER on the back panel.
- Connect the power supply to the printer and connect to an appropriate power source.
- Turn printer on by positioning the switch to the ON position, switch is found on left side of
printer.
- If the light on the front of the printer is not green, press the ON LINE button on the printer to
activate the printer.
- To print, access the “Print Reading Log” option and press .
- A formatted reading will be sent through the Com2/Printer port
each time is pressed.
Print Reading Log
Brix-TC Brix
←
Menu
↑
Read
Custom Channels
The r
2
i300 has the capabilities to measure additional products using custom channels. These
channels represent scales that have been developed to measure a specific product. Optional
channels can be selected only after they have been uploaded from a PC to the r
2
i300 using the
supplied PC interface software. The following describes the r
2
i300 custom channel possibilities.
Channel 1 – ICUMSA BRIX
The r
2
i300 is pre-programmed at the factory with channel 1 to read % Sucrose or the “Brix”
scale per the International Commission for Uniform Methods of Sugar Analysis (ICUMSA).
Temperature Corrected (TC) readings in channel 1 are valid for Brix Solutions only! This
channel cannot be altered.
Channel 2 – 8, User Programmable
User programmable, or custom channels as they are commonly
referred to may be programmed using your own refractive index,
temperature and percent solids data. Custom channels can
include definitions for units of measure such as specific gravity, %
protein, g/ml, etc. Provided a custom channel has been uploaded
to the r
2
i300, to access and activate a stored custom channel
advance to the “Select Channel” menu option and press . Press or to
advance through the available custom channels and press to activate.
To learn more about custom channel programming, request “Custom Channel Generation for
Automatic Refractometer Line” from Reichert Analytical technical support.
Select Channel
Brix-TC Brix
←
Menu
←
Menu
↓
Calibrate
↑
Read