15090-101 REV. H
15
Illumination Control
The Illumination ON/OFF Switch is located on the hand
grip of the PSL and works like a trigger. Refer to Figure
OI-04.
Squeezing the switch will turn the PSL illumination on.
To maintain illumination, keep squeezing the switch.
Release the switch to shut illumination off.
Note:
The green battery indicator LED will light up when
the PSL illumination is on. Refer to Figure OI-05.
Note:
The green Battery indicator LED will blink when
the battery is running out of charge. Refer to
Figure OI-05.
The Illumination Intensity Dial is located on the main
body of the PSL directly under the Oculars. Rotating the
Illumination Intensity Dial to the right will increase the
PSL illumination, and rotating to the left will decrease the
PSL illumination. Refer to Figure OI-05.
The illumination angle can be adjusted ± 30° by sliding
the Illumination Column left and right. Refer to Figure
OI-06.
Note:
Slide the Illumination Column using the Rubber
Grip found under the Slit Width Control Ring.
Refer to Figure OI-06.
Operating Instructions
(continued)
Slide
Figure OI-06, Adjust Angle
Rubber
Grip
Figure OI-04, ON/OFF
Illumination
ON/OFF
Switch
Illumination
Intensity
Dial
Figure OI-05, LED & Intensity
LED
Содержание Reichert PSL
Страница 1: ...PSL Portable Slit Lamp User s Guide...
Страница 23: ...15090 101 REV H 23 Notes...