background image

    25

Endurance Tilt Chair and Stand User’s Guide  15250-101  REV-A

 Warranty

This product is warranted by Reichert, Inc. against defective material and workmanship under normal use  
for a period of two years from the date of invoice to the original purchaser. The linear actuator lift mechanism is 
warranted for five years against defective material and workmanship under normal use. (An authorized dealer 
shall not be considered an original purchaser.) Under this warranty, Reichert’s sole obligation is to repair or 
replace the defective part or product at Reichert’s discretion. 

This warranty applies to new products and does not apply to a product that has been tampered with, altered  
in any way, misused, damaged by accident or negligence, or which has had the serial number removed, altered 
or effaced. Nor shall this warranty be extended to a product installed or operated in a manner not in accor-
dance with the applicable Reichert instruction manual, nor to a product which has been sold, serviced, installed 
or repaired other than by a Reichert factory, Technical Service Center, or authorized Reichert Dealer. 

Lamps, bulbs, charts, cards and other expendable items are not covered by this warranty. 

All claims under this warranty must be in writing and directed to the Reichert factory, Technical Service  
Center, or authorized instrument dealer making the original sale and must be accompanied by a copy of the  
purchaser’s invoice. 

This warranty is in lieu of all other warranties implied or expressed. All implied warranties of merchantability or 
fitness for a particular use are hereby disclaimed. No representative or other person is authorized to make any 
other obligations for Reichert. Reichert shall not be liable for any special, incidental, or consequent damages 
for any negligence, breach of warranty, strict liability or any other damages resulting from or relating to design, 
manufacture, sale, use or handling of the product. 

If notified promptly in writing of any action brought against the purchaser based on a claim that the instrument 
infringes a U.S. Patent, Reichert will defend such action at its expense and will pay costs and damages  
awarded in any such action, provided that Reichert shall have sole control of the defense of any such action with 
information and assistance (at Reichert’s expense) for such defense, and of all negotiation for the settlement and 
compromise thereof. 

Reichert reserves the right to make changes in design or to make additions to or improvements in its products 
without obligation to add such to products previously manufactured.

We use extreme care in selection, checking, rechecking and packing to eliminate the possibility of error. If any 
shipping errors are discovered:

1.  Carefully go through the packing materials to be sure nothing was inadvertently overlooked 

when the unit was unpacked. 

2.  Call the dealer you purchased the product from and report the shortage. The materials are 

packed at the factory and none should be missing if the box has never been opened. 

3.  Claims must be filed within 30 days of purchase. 

Our shipping responsibility ceases with the safe delivery in good condition to the transportation company. 
Claims for loss or damage in transit should be made promptly and directly to the transportation company.

If, upon delivery, the outside of the packing case shows evidence of rough handling or damage, the transporta-
tion company’s agent should be requested to make a “Received in Bad Order” notation on the delivery receipt. If 
within 48 hours of delivery, concealed damage is noted upon unpacking the shipment and no exterior evidence 
of rough handling is apparent, the transportation company should be requested to make out a “Bad Order”  
report. This procedure is necessary in order for the dealer to maintain the right of recovery from the carrier.

Содержание Reichert Endurance Tilt Chair and Stand



























Отзывы: