Ametek Powervar Sinergy III 2kVA, Руководство пользователя

Страница: 6 / 38

A01-00159 Rev B 6
•
Please use only VDE-tested, CE-marked (or UL-marked for
100/110/115/120/127 VAC models) mains cable (ex:
the mains cable of your computer) to connect the UPS
system to the building wiring outlet (shockproof outlet).
• Please use only VDE-tested, CE-marked (or UL-marked for
100/110/115/120/127 VAC models) power cables to connect
the loads to the UPS system.
• When installing the equipment, it should ensure that the sum of
the leakage current of the UPS and the connected devices does
not exceed 3.5mA.
•
Temperature Rating - Units are considered acceptable for use in
a maximum ambient of 40°C (104°F).
•
For Pluggable Equipment - The socket-outlet shall be
installed near the equipment and shall be easily accessible.
1.4. Operation
•
Do not disconnect the mains cable on the UPS system or the
building wiring outlet (shockproof socket outlet) during
operations since this would cancel the protective earthing of the
UPS system and of all connected loads.
•
The UPS system features its own, internal current source
(batteries). The UPS output sockets or output terminals block
may be electrically live even if the UPS system is not connected
to the building wiring outlet.
• To fully disconnect the UPS system, first press the OFF/Enter
button to disconnect the mains.
•
Prevent no fluids or other foreign objects from inside of the UPS
system.