Ametek MP3 SCR DeviceNet Head, Руководство HDR HMI

Страница: 53 / 72

46
RegMode’ will function as nonvolatile values.
0 = ‘LocalRef Demand’, ‘Local Setpoint%’, and ‘Local RegMode’ are reset to zero
on the next power-up reset.
1 = Save and reload last saved ‘LocalRef Demand’, ‘Local Setpoint%’, and ‘Local
RegMode’ on next powerup reset
Log Config specifies the range of events to be placed in the log.
0 = Only log controller events
1 = Also log DeviceNet events
Invert Discretes is a bit-mapped 16-bit word used to program the logic of the discrete
inputs (and discrete output relay). To provide a flexible custom interface, the user
may invert or not invert the logic of each discrete input. The value of each bit
depends on whether the input terminal is low or high (0V or 10V) in the active state.
For Bits 0-4, set to 0 if an open connector (low) is the false state. Set to 1 if a (high)
10V input is the false state.
Discrete Inputs:
Bit 0 = INPUT1 (normally open)
Bit 1 = Output Enable (normally open)
Bit 2 = External Fault (normally open)
Bit 3 = Fuse Switch (normally open)
Bit 4 = Heatsink OT
(default thermostat-normally open)
Bit 5 = Optional Internal Input (reserved)
Bit 6-14 = Reserved
Discrete Output:
Bit 15 = Relay Output