18 02-10-2007
124945
01
4.2.1
Media to be used
Oil
Use hydraulic oils: Jack oil, Exxon Nuto HP15 or H15, Tellus T14 or
the like.
Other fluids
Contact AMETEK Denmark if you want to use other fluids than
those stated above. For example SKYDROL or the like.
4.2.2 After
calibration
1.
Open the pump valve (pos. 2) on the right side of the pump.
2.
Open the pump valve (pos. 3) on the front of the pump gently
to protect the gauges from the pressure shock.
3.
Make sure that the pressure system is depressurised before
all items are disconnected.
4.
Disconnect all items.
5.
Close the filling valve (pos. 1) and the gauge valve (pos. 8).
6.
Close the valve (pos. 9) on the adapter mounted on the hose
to avoid leakage of oil.
7.
Clean all parts and put them back in the carrying case.