Ametek DMS-3K, Руководство по установке и эксплуатации

Страница: 23 / 206

Page 11
16 I Module
This module accepts 16 digital contact inputs using field contact voltages of 24, 48 or 125VDC.
The field contact voltage can be provided internally via the power supply regulator or externally
supplied by the customer. Digital Inputs can be Field Contacts, Control Pushbuttons (Ack,
Test, Reset, etc) as assigned via the web browser.
The variations available are:
16I Module Type Inputs
16I 90 24 VDC FCV, Internally Supplied
16I 91 24 VDC FCV, Externally Supplied
16I 92 48 VDC FCV, Externally Supplied
16I 95 125VDC FCV, Externally Supplied
16I 96 24VDC FCV, Externally Supplied (IDC connector input)
16I 98 48VDC FCV, Externally Supplied (IDC connector input)
16I 125 125VDC FCV, Externally Supplied (IDC connector input)
(Modules may have a suffix of A or B depending on the version. Ex. 16I 90A)
16 O Module
This module provides 16 solid state digital outputs. Digital Outputs can be configured as Lamp
Outputs (for remote Annunciator display) or Horn Outputs (for connection direct connection to
low power audible devices or to the Regulator Module Horn Input to drive external high power
devices). The variations available are:
16O Module Connection Type
16O-90 Screw Terminal
16O-91 IDC Connector
8 RR Module
This module provides 8 Form A or Form B Reed Relay Outputs. Reed Relay Outputs can be
configured as Retransmit Relay Outputs (to retransmit the status of the alarm input), Horn
Outputs, Alarm Outputs, Reflash Outputs, etc via the WEB Browser.
The different variations are:
8RR Module Output Type
8RR-90 Form A (Normally Open)
8RR-91 Form B (Normally Closed)